2014 Toyota Camry
Mileage
242,458
Service Date
3/27/2024
Services Performed
- DRAIN AND FILL ENGINE OIL, REPLACE ENGINE OIL FILTER, INSPECT BRAKES (THRU THE WHEELS, IF POSSIBLE), CHECK AND TOP OFF ALL FLUIDS EXCEPT FUEL.
- PERFORM A TOTAL QUALITY INSPECTION ON VEHICLE. A 4O+ POINT DIGITAL INSPECTION WITH PICTURES AND VIDEOS WILL BE TEXT (OR EMAIL IF YOU PREFER) TO YOU. LOOK OVER THAT INSPECTION AND THEN CALL US AT 951-677-2373
- RESET MAINTENANCE LIGHT AND PRINT REMINDER STICKER
- GAIN ACCESS TO ENGINE AIR FILTER AND COMPARE TO NEW UNIT. VERIFY NEW FILTER IS THE SAME SIZE AND FITS PROPERLY. CLEAN OUT ANY LOOSE DEBRIS FROM THE AIR BOX. INSTALL ALL REMOVED COMPONENTS IN REVERSE ORDER AND VERIFY INSTALL.
- Remove existing Cabin Filter and with blower fan running off external air, introduce Frigi Fresh to vent intake near hood. The Frigi Fresh will deodorize the fan box and all the under dash vents leaving them smelling fresh and clean. Once performed the new filter is installed and checked for proper operation.
- REMOVE FRONT WIPERS AND VERIFY NEW UNITS ATTACH PROPERLY AND ARE OF EQUAL LENGTH TO THE ORIGINALS. VERIFY OPERATION AFTER REPLACEMENT.
- REMOVE BOTH POSITIVE AND NEGATIVE TERMINALS. CLEAN BATTERY, TERMINALS AND HOLD DOWNS FROM ANY CORROSION BUILD UP. VERIFY A CLEAN CONTACT ON THE TERMINALS UPON INSTALL. SPRAY BATTERY PROTECTANT ON TERMINALS TO PREVENT CORROSION FROM RETURNING.
- REPLACE BULBS
- REMOVE EXISTING BRAKE PARTS AND COMPARE TO NEW UNITS, VERIFY PROPER FITMENT. CLEAN ALL MATING SURFACES AND LUBRICATE ALL SLIDES AND GUIDES. USE NEW HARDWARE WHEN PROVIDED. ASSEMBLE BRAKES IN REVERSE ORDER OF DISASSEMBLY. UPON TEST DRIVE VERIFY PROPER OPERATION. *NEW ROTORS COME WITH AN OIL APPLIED FROM THE MANUFACTURER TO PREVENT RUSTING WHILE ON THE SHELF. WE HAVE CLEANED THE SURFACE OF THE ROTORS BUT THE ROTOR WILL ABSORB SOME OIL THAT CANNOT BE CLEANED OFF. THIS OIL WILL BURN OFF NATURALLY OVER THE NEXT COUPLE OF DAYS AND MAY CAUSE A SMELL. THIS IS NORMAL AND WILL GO AWAY.
- STABILIZER BAR CONTROL LINK – Remove & Replace – Both
- CONTROL ARM – Remove & Replace – Gas,In-Line4 Lower,Both – [DOES NOT include alignment.]
- WHEEL ALIGNMENT
Selena R. gave our service a 5 star review on 3/27/2024
